Medical Physicists
IDPH Mammography Registration for Medical Physicists
Annual Renewal Requirements
Mammography Qualifications
Master's Degree or PhD Track (Initial Qualifications - use if qualifications obtained after 4/28/99)
Bachelor's Degree Track (Alternative - use if qualified prior to 4/2/99)
Stereotactic Breast Biopsy Qualifications
Initial Modality Training
For additional information
IDPH Mammography Registration for Medical Physicists
In order to provide medical physics surveys and consultations for mammography and stereotactic breast biopsy facilities in Iowa, medical physicists must apply to IDPH for registration.
Instructions as well as the link to apply through the online portal for Mammography or Stereotactic Medical Physicist registration can be found at our IDPH Regulatory Programs - Medical Physicists page. Each Medical Physicist must register individually.
Annual Renewal Requirements
An annual registration renewal is required of all Medical Physicists providing services to mammography and stereotactic breast biopsy facilities in Iowa. The renewal is due April 30 of every year. A renewal notice is sent out to each registered Medical Physicist via email approximately 60 days prior to the expiration date of the active registration. The electronic application should be completed and submitted through the online portal. The Mammography program staff will review the application, continuing education and continuing experience for approval. Once approved, the IDPH Approval Letter for Medical Physicists will be sent out via email.
- To avoid delays in the renewal process, proof of continuing requirements should be uploaded at the time the application is completed.
- Because the new expiration date will be April 30 of the following year, the Mammography program staff will look to ensure the Medical Physicist will continue to meet all continuing requirements through that next renewal cycle. If continuing education or experience will not be met, the program staff may be in contact to ask for additional proof of qualifications if it is available.
Return to top
Mammography Qualifications
The Medical Physicist Qualification Worksheet
can be used as a guide for the documentation needed in order to meet initial qualifications. The two tracks of training that could meet the initial qualification requirements are 1) with a Master’s Degree or higher (PhD) or 2) a Bachelor’s Degree. Details for the requirements for each track are outlined below. The track used to qualify is dependent on the date all qualifications were met. Proof of these qualifications must be submitted at the time the initial Iowa application is submitted.
Return to top
Master’s Degree or PhD (Initial Qualifications - use if qualifications obtained after 4/28/99)
Initial Qualifications
- Ph.D. in a physical science
- At least 20 hours of college level physics
- At least 20 contact hours of documented training in conducting surveys of mammography facilities.
- Experience conducting surveys of at least one (1) mammography facility and a total of at least 10 mammography units under supervision of an MQSA qualified medical physicist.
- Proof of ABR certification - OR - Unrestricted State Approval letter/licensure as a Diagnostic Medical Physicist.
Continuing Qualifications
Must provide proof of meeting these requirements at the time of annual Iowa registration renewal.
- Fifteen (15) hours of continuing education in the previous 36 months.
- Two (2) mammography facilities surveys performed in the previous 24 months.
- Six (6) mammography units in the previous 24 months.
Return to top
Bachelor’s Degree (Alternative - use if qualified prior to 4/28/99)
Initial Qualifications
- Bachelor’s Degree or higher obtained prior to 4/28/99 in a physical science.
- At least 10 semester hours of college level physics
- At least 40 contact hours of documented specialized training in conducting surveys of mammography facilities.
- Experience conducting surveys of at least one (1) mammography facility and a total of at least 20 mammography units under the supervision of an MQSA qualified medical physicist (training and surveys completed after degree and prior to 4/28/99).
- Proof of ABR certification - OR - Unrestricted State Approval letter/licensure as a Diagnostic Medical Physicist.
Continuing Qualifications
Must provide proof of meeting these requirements at the time of annual Iowa registration renewal.
- Fifteen (15) hours of continuing education in the previous 36 months.
- Two (2) mammography facilities surveys performed in the previous 24 months.
- Six (6) mammography units in the previous 24 months.
Return to top
Stereotactic Breast Biopsy Qualifications
Initial Qualifications
To qualify for stereotactic biopsy, the medical physicist must meet all Iowa and MQSA initial and continuing mammography qualifications as outlined in IAC Chapter 41.6.
The medical physicist must also meet Iowa stereotactic qualification requirements following one of the tracks listed below. The track used to qualify is dependant on the date all Iowa stereotactic qualifications were met:
- If qualified prior to July 1, 1998, must provide proof of performance of three (3) hands on stereotactic procedures at the time of initial Iowa registration.
- If qualified after July 1, 1998, must provide proof of performance of one (1) hands on stereotactic breast biopsy physics survey under the guidance of an MQSA qualified medical physicist at the time of initial Iowa registration.
Continuing Qualifications
Must provide proof of meeting these requirements at the time of annual Iowa registration renewal.
- Three (3) Stereo Continuing Education Units in previous 36 months.
- One (1) stereotactic unit survey in the most recent twelve (12) month time frame established by facility.
Return to top
Initial Modality Training
All medical physicists must meet the initial 8 hours of modality training for each modality they intend to survey. This includes full field digital mammography (FFDM) and digital breast tomosynthesis (DBT).
Example - If a facility has a FFDM and DBT mammography unit (2D/3D), the medical physicist must have proof of meeting 8 hours of initial digital training AND 8 hours of initial tomosynthesis training to be able to survey the facility’s FFDM/DBT unit.
For additional information:
Return to top